Asus Computer Automatic Repair | Stop The Startup Loop

The message Automatic Repair looks helpful on screen, yet on an Asus laptop or desktop it often means Windows keeps failing to boot. The system tries to repair itself, restarts, then falls straight back into the same loop. That wastes time and can put work files at risk.

What Asus Computer Automatic Repair Actually Means

When you see the line Preparing Automatic Repair on an Asus computer, Windows has noticed that a normal startup failed. Instead of giving up, it launches a special recovery mode that tries to solve boot problems on its own. If that process fails, you land on a blue screen that mentions Automatic Repair and offers advanced options.

In a normal case, Automatic Repair might run once, fix a minor disk or boot setting issue, and then Windows opens as usual. In the loop case, the Asus computer never reaches the desktop. It restarts again and again, or shows the message that Automatic Repair could not repair the PC. That loop points to deeper problems that need manual work.

Common Causes Of Asus Computer Automatic Repair Loop

Several different problems can push an Asus system into this repeating repair screen. Knowing the common triggers helps you pick the right fix and avoid making things worse.

• Interrupted updates — A forced shutdown or power cut during a Windows update can damage system files that handle boot tasks.
• Corrupted boot files — Damaged Boot Configuration Data or missing loader files stop Windows from handing control to the main system.
• Disk errors or bad sectors — A failing hard drive or SSD can cause data errors in areas that Windows needs during startup.
• Driver or software conflicts — New drivers, antivirus tools, or system utilities can clash with low level parts of Windows.
• Wrong BIOS or UEFI settings — Changes to boot order, secure boot, or storage mode on an Asus board can confuse Windows.
• Sudden power loss — Power cuts in the middle of file writes can damage the file system and leave Windows half written.

Quick Checks Before Deeper Windows Fixes

Quick check: Before you edit boot records or reset Windows, rule out basic hardware and power issues. These steps are simple, low risk, and often enough to stop an early stage loop for most users.

• Shut down the PC fully — Hold the power button for ten seconds until the Asus logo turns off, wait a short moment, then power it on again.
• Remove extra devices — Unplug USB drives, printers, game pads, and external hard drives so the Asus computer only has keyboard, mouse, and display attached.
• Check power and battery — For laptops, plug in the power adapter and confirm the charge light stays on; for desktops, confirm the power strip and cable sit firmly.
• Try one more normal boot — Tap the power button once, watch for the Asus logo, and see if Windows passes the message screen on the next run.

If the Automatic Repair loop still appears, move to built in Windows recovery tools. Those live in a separate area of the drive and often still load even when the main system has problems.

Deeper fix: You now want to reach the Windows Recovery Environment on the Asus device so you can use Startup Repair, System Restore, and command line tools.

• Enter Windows Recovery — Turn the Asus PC off and on three times in a row. As soon as you see Windows start to load, hold the power button to interrupt it. After three cycles, Windows should open the recovery menu.
• Use hardware keys on some models — On many Asus laptops you can press F9 or F8 during the logo screen to reach recovery options faster.

Fixing Asus Automatic Repair Loop On Startup

This section covers practical steps inside the Windows Recovery Environment that often break the startup loop on an Asus system. Move through them in order, since each step adds a little more change than the one before.

Run Startup Repair Again From Recovery Menu

• Open Advanced options — In the recovery menu, pick Troubleshoot, then Advanced options.
• Launch Startup Repair — Choose Startup Repair and select your Windows account so the tool can scan boot files.
• Let the scan finish — Wait for the scan and any automatic repair work to complete, then test a restart.

If Startup Repair reports that it could not repair your PC, do not repeat it endlessly. Move on to disk and file system checks instead.

Check The System Disk For Errors

• Open Command Prompt — From Advanced options pick Command Prompt to open a text window.
• Find the Windows drive letter — In recovery, Windows may use a different letter. Type dir c:, then dir d: until you see folders like Windows and Users.
• Run CHKDSK safely — Type chkdsk X: /f /r replacing X with the correct letter, then press Enter and allow the scan to repair file system errors.

Disk repair can take a long time on large drives, so plan to leave the Asus machine plugged in during the scan. When it ends, close the window and try a normal restart.

Repair System Files With SFC And DISM

• Run System File Checker — In Command Prompt type sfc /scannow /offbootdir=X:\\ /offwindir=X:\\Windows with X again set to the Windows drive letter.
• Use DISM if needed — If SFC reports problems it could not fix, run dism /image=X:\\ /cleanup-image /restorehealth to repair deeper image damage.

These tools look for damaged or missing core system files that often sit at the root of an Asus automatic repair loop. Once both scans finish, test another restart from the recovery menu.

Advanced Windows Repairs For Persistent Automatic Repair Loops

If the Asus system still falls back to Automatic Repair after disk and system file checks, the issue may sit inside the boot configuration or recent system changes. The next steps change more parts of Windows, so take care and go slowly.

Rebuild Boot Records And BCD Store

• Open Command Prompt again — Go back to Advanced options and launch Command Prompt.
• Run bootrec commands — Type each line and press Enter after each: bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd.
• Confirm new entries — When asked to add found installations to the boot list, type Y and press Enter.

If these commands finish without error messages, restart the Asus computer and see if Windows opens without the repair loop. If you still land back on the repair screen, consider rolling the system back to an earlier state.

Roll Back With System Restore

• Open System Restore — In Advanced options select System Restore.
• Pick a restore point — Choose a point dated before the first Asus automatic repair loop began, such as right before a driver or update install.
• Confirm and wait — Follow the prompts and allow Windows to revert system files and settings.

System Restore keeps your personal files, yet removes recent drivers, updates, and registry changes that might have triggered the loop. Once the process ends, restart to test whether Windows can now pass the logo screen.

Try Safe Mode To Remove Problem Drivers Or Apps

• Force Safe Mode boot — In the recovery menu open Startup Settings, then press Restart and choose the numbered option for Safe Mode with Networking.
• Uninstall suspect software — In Safe Mode, remove recent drivers, antivirus tools, or system cleaners that line up with the start of the Automatic Repair problem.
• Disable fast startup settings — In the Control Panel power options, turn off fast startup so Windows performs a cleaner boot next time.

If Safe Mode runs well and the Asus automatic repair loop does not return on the next full restart, you likely removed the trigger. Keep an eye on the system during the next few boots to confirm the fix holds.

Reset Options, Data Backup, And Asus Service

If none of the previous steps stop the loop, you may need to reset Windows on the Asus computer or reach out for direct help. At this stage, the priority is data safety before large changes.

Back Up Critical Files From Recovery

• Use Command Prompt copy — From Command Prompt, use copy commands to move documents and photos to a USB drive so you do not lose them during a reset.
• Use a bootable USB tool — If you have a Windows install USB, boot from it and use its recovery tools to copy data to external storage.

Once your data sits safely on another drive, you can reset Windows with less stress. On many Asus systems, this option lives right inside the Windows Recovery menu.

Reset Windows While Keeping Files

• Open Reset this PC — In Troubleshoot, choose Reset this PC.
• Choose Keep my files — This option reinstalls Windows while leaving user folders in place.
• Follow reset prompts — Let the reset run and then see whether the Asus system boots cleanly without triggering Automatic Repair.

If even a full reset fails to clear the loop, the Asus device might have deeper hardware issues such as a failing SSD or RAM problems. In that case, built in software tools are no longer enough.

Contact Asus Or A Trusted Repair Shop

• Check warranty status — On the Asus service site, enter your model to see if the machine still sits under warranty.
• Use Asus diagnostics — Many models offer built in hardware tests in the BIOS or through Asus diagnostic tools that can flag disk or memory faults.
• Share details of past steps — When you speak with service or a repair shop, list the fixes you tried so they can skip repeat work and test hardware directly.

By walking through careful checks, repair tools, boot fixes, and reset options in this order, most Asus owners can bring a stuck Windows install back to life. When those options run out, having clear notes and protected data makes the move to hardware repair far less stressful.

Quick Reference Table For Asus Automatic Repair Fixes

This table sums up common causes of the Automatic Repair loop on Asus computers and the first tool to try for each one.

Send us your feedbackTell us what you thought about this post

Name * Email *

Your comment *

Quick check — what is …? *

Send feedback