7 Best Anti Vibration Pads For Washing Machines | Stop the Shake

Check Price on Amazon

Tall rubber pedestals that lift a washer a full 3.14 inches off a wet basement floor.

These pads stand out for their height: each pad measures 3.54 x 3.54 x 3.14 inches. That lift keeps the appliance bottom away from moisture and makes cleaning underneath easier. The bottom layer is rubber for slip resistance, while the white PP (polypropylene, a hard plastic) body handles structural support. The buckle design lets you tilt the machine and snap the pads into place without tools. One reviewer says: “The way my washing machine was moving around I can’t believe how this stopped that without all the noise and bouncing around these things are magnificent.”

A handful of buyers report the pads are slippery on certain flooring and may dislodge if bumped. For tight recessed spaces, installation can be difficult. Stability gets mixed feedback — the pads work best when you have full access to all four feet. If your laundry area has flood risk or you simply want a few inches of air under the machine, this is the pick.

Check Price on Amazon

Dense rubber pads that one owner calls absolutely super for quieting a noisy front-loader.

A 2.36-inch inner diameter (the hole in the middle) makes these compatible with most standard washing machine feet. At 1.26 inches tall, they offer a middle-ground height — shorter than the SEISSO pedestals but thicker than flat pads. Owners mention a major drop in noise and shaking.

The manufacturer honestly states that these pads reduce excessive shaking, noise, and walking, but they do not eliminate vibration entirely if the washer itself has worn shocks or incorrect leveling. That caveat sets proper expectations. For most people with a reasonably balanced washer, these deliver near-silent operation. The Rubber-Cal mat (reviewed below) is the denser choice if you want to handle a truly out-of-balance machine.

Check Price on Amazon

Triangular-grip pads that anchor larger washer feet others cannot fit — with a five-year warranty.

Fits appliance feet up to 2.25 inches in diameter. That separates it from the Linda’s Essentials pads, which max out at 1.75 inches. The 3D TrianGrip design uses a triangle pattern and suction to lock the machine in place. Owners consistently say the pads completely stop a washer from moving during the spin cycle, with many noticing a 60-70% reduction in noise. The slimmer profile raises the machine only 3/4 inch, so clearance is rarely an issue. A free level tool comes included, and a 5-year extended warranty is unusually generous.

Stability gets mixed feedback from a small number of owners, mostly related to uneven floors rather than the pads themselves. If your laundry space has a concrete slab that is not perfectly flat, pair these with proper leveling of the washer legs first. For anyone with a modern front-loader or a 2-in-1 combo, the larger foot opening is a practical advantage.

Check Price on Amazon

A full-size mat that covers both the washer and dryer with a single sheet of high-density PVC.

This 63 x 29.5 inch mat sits under the entire appliance set. PVC (polyvinyl chloride, a durable plastic) at 0.25 inches thick absorbs shock across the whole footprint, reducing vibration and noise while protecting the floor from water spills and detergent drips. You can also trim it with a utility knife to fit a smaller space. Customers note it solved issues of a washer “dancing across the floor” and note that the dual-device coverage is convenient for side-by-side setups.

The main trade-off is mobility. Once the machines are on the mat, moving them for cleaning or repairs requires effort — you have to “walk” them off to avoid tearing the mat. Also, the mat still allows some vibration to transmit through, though the washer no longer jumps. If you need a dense rubber slab instead, the Rubber-Cal mat is a heavier option.

Check Price on Amazon

A foldable PVC mat that covers two machines and can be stored without permanent creases.

At 62.9 x 29.5 inches, this mat is nearly the same size as the NYFITY but focuses on easy handling. The PVC material folds without damage, so you can store it flat or fold it for transport. The non-slip design works on both sides. Owners note it holds up well over time, even under stacked units, and that it completely stopped vibration and movement on concrete floors. One reviewer says it solved washing machine “walking” on new flooring.

Vibration control gets mixed feedback. Some owners say it stopped floor movement entirely, while others find the vibrations are still strong. This mat is better at reducing noise than eliminating all vibration transfer. An initial strong smell is noted by a few owners, though it fades. If you need a size-adjustable mat you can cut or fold for a non-standard space, this is a solid choice.

Check Price on Amazon

A 16-pound slab of recycled rubber that owners call a great investment for a washer that used to walk.

This is the heaviest option at 16 pounds, made from 100% recycled tire rubber. At 4 feet by 3 feet and 0.25 inches thick, it sits under the entire appliance as a solid sheet. Owners consistently report that it stopped a washer from “walking all over the place” during the spin cycle and made both the washer and dryer much quieter. The mat is easy to cut with tin snips if you need a custom shape. It is also free of PVC (polyvinyl chloride), lead, silicone, BPA, phthalates, and latex.

The weight makes it a permanent install — you are not moving this mat around for fun. A small number of owners say it did not fully satisfy their need for vibration isolation, though that is the minority. If you want the densest, heaviest mat available, this wins. The Rubber-Cal mat beats the lighter PVC competitors on pure material density, but it costs about twice as much as some other options.