How to Connect Bluetooth Beanie to Phone | Pair It in 30 Seconds

For the full breakdown, see our best Beanie With Bluetooth guide.

A Bluetooth beanie is just a Bluetooth audio device disguised as a winter hat. The pairing process is nearly identical to connecting wireless headphones or a speaker. Here is the exact sequence that works, plus the names your beanie might broadcast under so you don’t mistake it for a neighbor’s speaker.

Charge the Beanie First (Nearly Every Manual Says So)

Before any button-pressing, confirm the beanie has a charge. Multiple manufacturer manuals explicitly require the battery to have power before the beanie will enter pairing mode. Plug it into a USB port or charger until the charging indicator shows solid or turns off. Skipping this step is the single most common reason a brand-new beanie fails to appear in the phone’s Bluetooth list.

The Pairing Sequence That Works Every Time

Follow these steps in order:

1. Turn the beanie off. If it was on, press and hold the multifunction or power button until it powers down (usually the LED turns off).
2. Enter pairing mode. Press and hold the same button for 3 to 5 seconds. The LED should start flashing — typically alternating red and blue, or blinking blue rapidly.
3. Open your phone’s Bluetooth settings. On Android: swipe down from the top of the screen, touch and hold the Bluetooth icon, then tap Pair new device. On iPhone: open Settings > Bluetooth and wait for the device list to populate.
4. Select the beanie’s broadcast name. This varies by model (see the table below). Tap the name and confirm pairing if your phone prompts you.
5. Confirm success. Your phone will show “Connected” under the device name.

If the LED goes solid (often blue) or you hear a beep through the beanie’s speaker, pairing worked.

Common Bluetooth Beanie Names (So You Know What to Tap)

Beanies do not broadcast under a predictable name like “Beanie.” The device name is set by the manufacturer and is often a model code. If you see nothing in your phone’s list that sounds like a hat, look for one of these names — they are documented in actual product manuals and listings:

If you do not see your beanie’s brand listed, try the most common generic fallback names: BT-01, Bluetooth Beanie, or simply the brand name. The exact name is in your manual’s pairing section — but most manuals list only the broadcast name, not the steps.

What to Do When It Won’t Pair (The Two Real Fixes)

If the beanie shows up in the list but will not connect, the fix is almost always one of two things. First, the beanie may already be connected to another phone — if you paired it with a tablet or an old phone earlier, turn that device’s Bluetooth off. Second, some beanies require a factory reset to clear a stuck pairing: turn the beanie off, then hold the button for 10 to 15 seconds until the LED flashes in a different pattern (often rapidly or in a specific color sequence), then release and retry the pairing steps from the beginning.

If the beanie does not show up in the list at all, the issue is usually the pairing mode LED. The beanie must be flashing — not solid — before your phone will see it. Turn the beanie off completely and restart the hold-the-button step.

FAQs

Can two phones connect to the same Bluetooth beanie at once?

Re-enabling the first phone’s Bluetooth afterward may require manual reconnection.

Does the beanie automatically reconnect after the first pairing?

Why does my beanie show as connected but no sound comes through?

The phone may still be sending audio to its internal speaker or a previously connected device. Restarting the music app also forces the phone to re-route audio.