Resetting a Petlibro feeder requires different steps depending on the model — Air feeders use the + and – buttons together, while Wi-Fi models have a dedicated Reset button.
Your Petlibro feeder froze mid-dispense. The Wi-Fi dropped and won’t reconnect. Or you’re passing it to another household. A reset clears the slate, but the wrong button sequence just wastes time. Petlibro makes six distinct models, and the reset method flips completely between the non-WiFi Air units and the WiFi-equipped Granary, Essential, and One RFID feeders. This guide covers every current model with the exact button holds, unlock steps, and app-based options so you get back to feeding on your first try.
Which Petlibro Model Do You Have?
Finding the model number on the bottom or back label takes 10 seconds and saves you from trying Air instructions on a Granary unit. The reset method depends on the button layout, which changes between non-WiFi and WiFi models.
- Air (AF008 / PLAF008) — 4L capacity, LCD touch screen. AF008 is non-WiFi; PLAF008 has WiFi. Reset uses the + and – buttons.
- Essential WiFi (PLAF101/102, AF101/102) — 5L capacity, dual-tray option. Has a dedicated Reset button.
- Granary WiFi (PLAF103) — 5L capacity, color LCD screen. Has a dedicated Reset button.
- One RFID (AF301 / PLAF301) — RFID pet recognition. Has a dedicated Reset button.
- Basic (AF002) — 4L capacity. Manual button hold, no WiFi.
- Easy Feed 6L (AF003) — 6L capacity. Manual button hold, no WiFi.
| Model | Model Numbers | Reset Method |
|---|---|---|
| Air | AF008, PLAF008 | Hold + and – for 3–5 seconds |
| Essential WiFi | PLAF101/102, AF101/102 | Unlock first, then hold Reset button 5–6 seconds |
| Granary WiFi | PLAF103 | Unlock first, then hold Reset button 5–6 seconds |
| One RFID | AF301, PLAF301 | Unlock first, then hold Reset button 5–6 seconds |
| Basic | AF002 | Hold manual button until reset |
| Easy Feed 6L | AF003 | Hold manual button until reset |
Resetting the Air Feeder (AF008 or PLAF008)
The Air model uses a two-button combo instead of a dedicated reset key. Press and hold the + and – buttons at the same time for 3 to 5 seconds. The feeder clears all time settings and feeding schedules from memory. No other button combination works — pressing Feed or the microphone key during the hold interrupts the sequence.
The reset confirms immediately: the screen returns to its default state, and any saved meal times are gone. You can then program fresh schedules from scratch.
Resetting Wi-Fi Feeders: Granary, Essential, and One RFID
Every WiFi-equipped Petlibro model shares the same button layout and reset procedure. One detail trips people up repeatedly: the control panel must be unlocked first.
Step 1 — Unlock the panel. Press and hold the far-left Unlock button for 3 seconds. You will hear a single beep, and the screen indicates the buttons are active.
Step 2 — Hold the Reset button. Press and hold the far-right Reset button for 5 to 6 seconds. Keep holding until you hear three beeps and see one of these messages: “Reset successfully” or “Ready for Wi-Fi connection.” The Wi-Fi indicator light starts flashing.
Step 3 — Reconnect through the app. The feeder has now wiped all schedules and disconnected from your network. Open the Petlibro app and run the initial setup to pair it again. Petlibro’s official support page for the Granary WiFi reset procedure confirms the three-beep confirmation as the success signal.
Skipping the unlock step produces nothing — the Reset button is ignored while the panel is locked.
App-Based Factory Reset (For Connected Units)
If the feeder is still paired to your phone, you can reset it from the Petlibro app without touching the hardware. Open the app, tap the top-right icon on the feeder’s screen, and select Factory Reset. Alternatively, choose Remove Device and confirm Disconnect and wipe data. The feeder responds with three beeps and the Wi-Fi light flashes, confirming the wipe.
This method is convenient when the physical Reset button is hard to access or when you want to erase personal data before selling or gifting the unit. It works on Granary, Essential, and One RFID models.
Common Mistakes That Block the Reset
Three errors cause nearly every failed reset on Petlibro feeders:
- Skipping the unlock. On WiFi models, the control panel locks after a period of inactivity. Holding the Reset button while the panel is locked does nothing. Press the Unlock button for 3 full seconds — the beep is your confirmation that the panel is live.
- Using the wrong button pair. The Air model has no Reset button. Using + and – together on a Granary unit does nothing, and pressing Reset on an Air unit does nothing. Verify the model before you start.
- Releasing too early. WiFi models need a full 5–6 second hold. Releasing at 2–3 seconds produces no result. Count the seconds or wait for the three beeps.
| Issue | Likely Cause | Fix |
|---|---|---|
| Reset button does nothing | Panel is locked | Hold Unlock button 3 seconds first |
| Air feeder won’t respond | Wrong buttons | Use + and – together, not Reset |
| Feeder resets but won’t reconnect | Residual power in circuit | Remove batteries and unplug for 30 seconds |
| App shows feeder offline after reset | Wi-Fi credentials erased | Run full app setup from scratch |
| Reset interrupts mid-sequence | Holding wrong key or releasing early | Start over with correct button and full hold time |
What Happens After the Reset
A factory reset — whether done by buttons or through the app — permanently deletes every feeding schedule, meal time, portion size, and Wi-Fi credential stored on the device. The feeder returns to its out-of-box state. You will need to create new schedules and, on WiFi models, reconnect the feeder through the Petlibro app before it dispenses again.
If the reset didn’t resolve your issue — or you are considering a new feeder — our roundup of the best automatic cat feeders compares models, capacities, and app features side by side.
FAQs
Does resetting a Petlibro feeder delete all my feeding schedules?
Resetting permanently removes all feeding schedules, meal timings, and portion settings from the device. On WiFi models, the reset also disconnects the feeder from your home network. After the reset, you will need to create new schedules and reconnect the device through the Petlibro app before it can dispense food again.
Why won’t my Petlibro Granary feeder reset even when I hold the button?
The most common cause is a locked control panel. Press and hold the Unlock button on the far left for 3 seconds until you hear a beep. Once unlocked, press and hold the Reset button on the far right for 5–6 seconds. If it still fails, remove batteries and unplug the adapter for 30 seconds before trying again.
Can I reset my Petlibro feeder if I lost the app or it won’t open?
Yes. All Petlibro feeders can be reset using the physical buttons on the device without the app. The Air model uses the + and – buttons held together. WiFi models use the dedicated Reset button after unlocking the panel. No app or smartphone is required for the hardware reset.
Will resetting my Petlibro fix Wi-Fi connection problems?
A reset is the standard fix for Wi-Fi issues, but only if you then reconnect the feeder through the app from scratch. If the feeder remains offline after a reset and reconnection attempt, check your router’s 2.4 GHz band settings — Petlibro feeders require 2.4 GHz and do not support 5 GHz networks.
How do I reset a Petlibro One RFID feeder?
The One RFID feeder follows the same procedure as other WiFi models. Unlock the panel by holding the far-left button for 3 seconds until you hear a beep. Then press and hold the far-right Reset button for 5–6 seconds. The feeder will emit three beeps and display “Reset successfully” when complete.
References & Sources
- Petlibro. “How to Reset the Air Automatic Feeder (AF008/PLAF008).” Official reset instructions for Air models.
- Petlibro. “How Do I Reset the Essential WiFi Feeder (PLAF101/102, AF101/AF102)?” Official reset guide for Essential WiFi models.
- Petlibro. “How do I reset the Granary Wi-Fi Feeder (PLAF103)?” Official support page with three-beep confirmation details.
- Petlibro. “What can I do if the One RFID Pet Feeder fails to connect?” Reset and connection troubleshooting for One RFID.
- Petlibro. “Petlibro Help Center.” Official support hub with additional guides and contact info.